Everything you Need to Know about Pressure Washing your Walkway

A shiny clean walkway is a priority for many property owners when it comes to improving their assets (and if it’s not, it definitely should be). Actually, a nice and even surface to walk in isn’t just aesthetically pleasing, but also safe for you and everyone who steps into your property since it reduces the risk of accidents.

Pressure washing is the best bet to embellish your walkways and sidewalks. And the best thing about it is that the work is done in under two hours!


In this blog post, we will tell you what you need to pressure wash your walkway/sidewalk and the best techniques to achieve a 10/10 result.


Without further ado, let’s get started.


You’ll need the following supplies:


  • A power washer and a spray (obviously), preferably with a pressure washing contractor attached to it.

  • An extension cord to work comfortably.

  • Waterproof & protection apparel.

  • A hose.

  

Before starting, you have to be sure that your contractor knows their equipment like the back of their hand. And if that’s not the case, maybe you should consider changing your mind about having them for the job - it’s never too late!


Fill the water source and hook it to the powerwasher - make sure to always do this before turning on the power. Also, hook the sprayer in to set up the machine thoroughly.


Our experience has shown that gas-powered pressure washers are more potent - therefore, it is a good idea to get one of those. They usually run at 2,000 PSI, but it may run at 1,200 PSI if it’s an electrical one. If they happen to be too potent, you can always adjust the potency! Whether you’re using a gas-powered or an electrical power washer, it is always a good idea to test them before using them over the actual concrete since they can be way too powerful for the material your sidewalk is made of and end up chipping or cracking the surface. 


Now, you’re ready to remove dirt, stains, mold, and moss from your walkway! Make sure to go over every square inch of it because that’s how you’ll see significant results. Don’t be afraid to play with different nozzles; each one is designed to wash away different spots in different places. 


Let your walkway dry to fully admire your work. And most importantly, don’t pack until it’s dry and you’ve checked it - you won’t want to take out everything again if there’s a retouch to make!


Need the help of professionals? Look no further! If you’re in Jacksonville, FL, or its surrounding areas,don’t hesitate to give them a call! The best pressure washing results are achievedwith Adams Pressure Cleaning.






Comments